Heat transfer · Free tool
Batch heating and cooling time calculator
Estimate how long a jacketed reactor or tank takes to heat or cool a batch, with steam or with a liquid medium, and how much steam it uses.
1. Batch
Water 4.18, aqueous solutions 3.5–4, organics 1.8–2.5
2. Heating or cooling medium
3. Heat transfer
Jacketed SS vessel 300–600, glass-lined 200–350, coil 500–900
Heating time
45.6min
Heat duty per batch
291.7kWh
Average heat rate
384.1kW
| UA | 4.8 kW/K |
|---|---|
| Steam temperature | 143.7 °C |
| Steam consumed (excluding losses) | 492.2 kg per batch |
| Average steam rate | 648.1 kg/h |
Want these numbers checked?
Send them to a SEMCO process engineer for a free review, sizing and budget price.
How this calculator works
For condensing steam, the jacket stays at the steam's saturation temperature, so the batch approaches it exponentially: time = (M·cp ÷ U·A) × ln((Ts − t1) ÷ (Ts − t2)).
For a liquid medium such as cooling water or thermic fluid, its temperature changes through the jacket. The calculator uses Kern's method for a well-mixed batch with a non-isothermal medium.
Formulas used
Isothermal medium (steam)
Non-isothermal medium (Kern)
Assumptions and limits
- Well-mixed batch with constant properties and constant U.
- No heat losses, no reaction heat and no phase change in the batch.
- Use the wetted area at your working level; U values in the hint are typical for agitated vessels.
Worked example
5,000 kg batch (cp 3.5 kJ/kg·K) heated from 30 to 90 °C with steam at 3 bar(g), U = 400 W/m²K, A = 12 m².
- Steam condenses at about 144 °C.
- θ = (5,000 × 3,500 ÷ 4,800) × ln(114 ÷ 54) ≈ 2,730 s ≈ 46 minutes.
- Heat duty ≈ 292 kWh, about 490 kg of steam per batch before losses.
Frequently asked questions
What U value should I use for a jacketed reactor?
Roughly 300–600 W/m²K for agitated stainless vessels with steam or water, 200–350 for glass-lined vessels, and higher for internal coils. Viscous batches are lower.
How can I speed up heating?
Increase steam pressure (temperature difference), improve agitation, add a half-pipe jacket or internal coil for more area, and keep the jacket free of air and condensate.
Does this include the vessel's own heat capacity?
No. For heavy vessels, add the steel mass × 0.5 kJ/kg·K to the batch heat capacity.
Need it designed and built?
SEMCO designs, fabricates and commissions evaporators, ZLD plants, heat exchangers, reactors and vacuum systems in its own factories in Pune and Solapur.
Related tools
Agitator power and motor calculator
Reynolds number, power number, shaft power, torque, tip speed and the motor kW for your reactor or tank.
Heat exchanger LMTD and area calculator
Heat duty, missing outlet temperature, LMTD, F-correction and the heat transfer area you need.
Saturated steam table calculator
Temperature, pressure, enthalpy, latent heat and specific volume of saturated steam, in bar(g), bar(a), kg/cm² or psi.
Results are engineering estimates for early sizing and budgeting. Final designs depend on your liquid, site and codes, and are confirmed in SEMCO's proposal. Method reviewed by Jogender Dhayal, Director, SEMCO.