SEMCO
Get a Quote

Separation & distillation · Free tool

Distillation column stages calculator (McCabe-Thiele and FUG)

Estimate the minimum reflux, minimum stages and number of theoretical stages for a binary distillation, with a live McCabe-Thiele diagram and column flows.

StagesRminFeed stageDiagram

1. Separation

–

Benzene-toluene ≈ 2.4, methanol-water ≈ 3–4 (non-ideal)

mole %
mole %

2. Feed and reflux

mole %
–

1 saturated liquid, 0 saturated vapour, >1 subcooled

× Rmin

1.1–1.5 is the usual economic range

kmol/h

Theoretical stages (McCabe-Thiele)

14

Feed on stage 7 from the top

Minimum reflux Rmin

1.444

Operating R = 1.878

Minimum stages Nmin (Fenske)

6.43

Gilliland estimate 13.7

x, liquid mole fraction (light)y, vapour mole fraction
Green: equilibrium curve. Blue: operating lines. Amber: q-line. Black: theoretical stages stepped from the top.
Details
Distillate flow D38.89 kmol/h
Bottoms flow B61.11 kmol/h
Reflux L = R·D73.02 kmol/h
Vapour to condenser V = (R+1)·D111.91 kmol/h
Pinch point (x, y)0.4, 0.625
Theoretical stages include the reboiler as one stage. Divide by tray efficiency (often 50–80%) for actual trays, or multiply by HETP for packed height.

Want these numbers checked?

Send them to a SEMCO process engineer for a free review, sizing and budget price.

Discuss on WhatsApp

How this calculator works

The equilibrium curve comes from a constant relative volatility α. Minimum reflux is set by where the q-line meets the equilibrium curve (the pinch). Minimum stages at total reflux come from the Fenske equation.

At your operating reflux, the calculator steps off theoretical stages between the equilibrium curve and the rectifying and stripping operating lines, switching at the feed. The Gilliland correlation (Eduljee form) gives a cross-check.

Formulas used

Equilibrium (constant α)

y=αx1+(α−1)x

Fenske minimum stages

Nmin=ln[xD1−xD·1−xBxB]lnα

Gilliland (Eduljee)

N−NminN+1=0.75[1−(R−RminR+1)0.5668]

Assumptions and limits

  • Binary or pseudo-binary system with constant relative volatility; non-ideal systems and azeotropes need real equilibrium data.
  • Constant molar overflow (equal latent heats).
  • Theoretical stages include the reboiler; divide by tray efficiency for real trays.

Worked example

α = 2.5, feed 40 mol% light key as saturated liquid, distillate 95%, bottoms 5%, R = 1.3 × Rmin.

  1. Pinch at x = 0.40, y = 0.625, so Rmin = (0.95 − 0.625) ÷ (0.625 − 0.40) ≈ 1.44 and R ≈ 1.88.
  2. Nmin = ln(19 × 19) ÷ ln 2.5 ≈ 6.4.
  3. Stepping off gives 14 theoretical stages with the feed on stage 7 from the top; Gilliland gives about 13.7.

Frequently asked questions

How do I find the minimum reflux ratio?

Draw the q-line from the feed composition to where it meets the equilibrium curve. The rectifying line through the distillate point and that pinch has slope Rmin ÷ (Rmin + 1).

What reflux ratio should I operate at?

Usually 1.1 to 1.5 times the minimum. Higher reflux needs fewer stages but more reboiler steam and condenser cooling.

How do theoretical stages relate to real trays?

Divide theoretical stages (excluding the reboiler) by the tray efficiency, often 50–80%. For packed columns multiply by the HETP of the packing.

Need it designed and built?

SEMCO designs, fabricates and commissions evaporators, ZLD plants, heat exchangers, reactors and vacuum systems in its own factories in Pune and Solapur.

Results are engineering estimates for early sizing and budgeting. Final designs depend on your liquid, site and codes, and are confirmed in SEMCO's proposal. Method reviewed by Jogender Dhayal, Director, SEMCO.