SEMCO
Get a Quote

Separation & distillation · Free tool

Vapour pressure and boiling point calculator

Find the vapour pressure of water and 18 common solvents at any temperature, or their boiling point at any vacuum. Useful for vacuum distillation, solvent recovery, drying and evaporator design.

mbarBoiling °CVacuum table

1. Liquid

2. Calculate

I know the

Boiling point

45.3°C

at 0.1 bar(a)

Normal boiling point

110.6°C

Vacuum gauge reading

685mmHg vac

Toluene: boiling point under vacuum

PressuremmHg(a)mmHg vacuumBoils at °C
1,013 mbar(a)7600110.6
800 mbar(a)600160102.5
600 mbar(a)45031093.2
400 mbar(a)30046080.9
200 mbar(a)15061061.9
100 mbar(a)7568545.3
50 mbar(a)37.572230.5
20 mbar(a)1574513.2

Want these numbers checked?

Send them to a SEMCO process engineer for a free review, sizing and budget price.

Discuss on WhatsApp

How this calculator works

The Antoine equation links vapour pressure and temperature: log₁₀(P) = A − B ÷ (C + T). Each solvent's constants were checked against its normal boiling point. Water uses the IAPWS saturation equation instead, so it is accurate up to its critical point.

Rearranging gives the boiling point at any pressure, which is the temperature your liquid will boil at under that vacuum.

Formulas used

Antoine equation

log10PmmHg=A−BC+T°C

Assumptions and limits

  • Pure components. Mixtures boil over a range; use Raoult's law or a process simulator.
  • Antoine constants are most accurate within about 50–60 °C of the normal boiling point.

Worked example

Toluene under 100 mbar(a) vacuum.

  1. log₁₀(75.0 mmHg) = 1.875.
  2. T = 1,344.8 ÷ (6.95464 − 1.875) − 219.48 ≈ 45.3 °C, compared with 110.6 °C at atmospheric pressure.

Frequently asked questions

At what temperature does water boil under vacuum?

About 46 °C at 100 mbar(a) (685 mmHg vacuum) and about 60 °C at 200 mbar(a).

Why distil solvents under vacuum?

Lower boiling points protect heat-sensitive products, allow cheaper low-pressure steam or hot water as the heat source, and often improve separation.

Can I add my own liquid?

Yes. Choose "Custom Antoine constants" and enter A, B and C for mmHg and °C.

Need it designed and built?

SEMCO designs, fabricates and commissions evaporators, ZLD plants, heat exchangers, reactors and vacuum systems in its own factories in Pune and Solapur.

Results are engineering estimates for early sizing and budgeting. Final designs depend on your liquid, site and codes, and are confirmed in SEMCO's proposal. Method reviewed by Jogender Dhayal, Director, SEMCO.