SEMCO
Get a Quote

Everyday helpers · Free tool

Process engineering unit converter

Convert the units that turn up on Indian plant datasheets and vendor quotes: kg/cm² and bar, mmHg vacuum and mbar absolute, KLD and m³/h, kcal/h, kW and TR, heat transfer coefficients and viscosity. Every unit is shown at once.

11 quantity typesGauge ↔ absolute

Convert units

bar1
kPa100
MPa0.1
Pa1,00,000
mbar1,000
kg/cm²1.01972
psi14.5038
atm0.986923
mmHg / torr750.062
inHg29.53
m water column10.1972

For gauge and vacuum readings use the pressure and vacuum converter below.

Pressure and vacuum: gauge ↔ absolute

bar(a)
Absolute pressure0.21332 bar(a)
213.32 mbar(a)
160 mmHg(a) / torr
Gauge pressure600 mmHg vacuum
78.95% vacuum

Absolute = gauge + atmospheric. A vacuum gauge reading in mmHg is subtracted from atmospheric pressure (760 mmHg at sea level).

How this calculator works

Each quantity is converted through one base unit using exact or standard conversion factors (for example 1 kg/cm² = 0.980665 bar, 1 kcal = 4.1868 kJ, 1 TR = 3.51685 kW). Temperature conversions also apply the zero-point offset.

The pressure and vacuum panel converts gauge readings to absolute pressure by adding atmospheric pressure, and vacuum readings by subtracting them from atmospheric pressure. Use your local atmospheric pressure for accuracy on hill sites.

Formulas used

Absolute and gauge pressure

Pabs=Pgauge+Patm, Pabs=Patm−Pvacuum

Heat duty

1 kW=860.4 kcal/h, 1 TR=3.517 kW

Heat transfer coefficient

1 kcal/h·m2·°C=1.163 W/m2·K

Assumptions and limits

  • International table calorie (4.1868 J) is used for kcal.
  • Pressure units in the first panel are absolute. KL is treated as one cubic metre.
  • Metric horsepower (PS) is 0.7355 kW; imperial horsepower is 0.7457 kW.

Worked example

A vacuum gauge on an evaporator reads 650 mmHg at a site near sea level.

  1. Atmospheric pressure ≈ 760 mmHg (1.013 bar).
  2. Absolute pressure = 760 − 650 = 110 mmHg ≈ 147 mbar(a).
  3. From the steam table, water boils at about 54 °C at that pressure.

Frequently asked questions

How do I convert kg/cm² to bar?

Multiply by 0.980665. So 10 kg/cm² is 9.81 bar. For gauge readings, both units are gauge.

How do I convert vacuum in mmHg to absolute pressure?

Subtract the vacuum reading from atmospheric pressure: at sea level, absolute mmHg = 760 − vacuum mmHg. Multiply by 1.333 to get mbar(a).

How many kcal/h is 1 kW?

1 kW is about 860 kcal/h. So a 1,000,000 kcal/h heater is about 1,163 kW.

How do I convert KLD to m³/h?

Divide by the operating hours per day. For a plant running 24 hours, 100 KLD is about 4.17 m³/h; at 20 hours it is 5 m³/h.

What is a TR in kW?

One ton of refrigeration (TR) is 3.517 kW of cooling, equal to about 3,024 kcal/h.

Need it designed and built?

SEMCO designs, fabricates and commissions evaporators, ZLD plants, heat exchangers, reactors and vacuum systems in its own factories in Pune and Solapur.

Results are engineering estimates for early sizing and budgeting. Final designs depend on your liquid, site and codes, and are confirmed in SEMCO's proposal. Method reviewed by Jogender Dhayal, Director, SEMCO.