SEMCO
Get a Quote

Steam & utilities · Free tool

Gas flow conversion calculator

Convert gas flows between normal, standard and actual cubic metres per hour, kg/h and SCFM, at your line pressure and temperature. Useful for compressor, blower, burner and flow meter datasheets.

Nm³/hActual m³/hkg/hSCFM

1. Gas

–

1 for most gases below about 10 bar

2. Flow you have

per basis above

3. Actual line conditions

Normal flow

1,000Nm³/h

Actual flow

160.34m³/h

at 7.013 bar(a), 30 °C

Mass flow

1,292.05kg/h

Details
Standard flow (15 °C)1,054.91 Sm³/h
SCFM (60 °F)622.1
Molar flow44.615 kmol/h
Gas density at line conditions8.058 kg/m³
Gas density at normal conditions1.2921 kg/Nm³
Molecular weight used28.96

Want these numbers checked?

Send them to a SEMCO process engineer for a free review, sizing and budget price.

Discuss on WhatsApp

How this calculator works

Every volume basis is just a number of moles at a stated pressure and temperature. The calculator converts your flow to moles using the ideal gas law (with an optional compressibility factor Z at line conditions), then back to each basis.

Normal conditions are 0 °C and 1.01325 bar(a); standard conditions here are 15 °C and 1.01325 bar(a); SCFM uses 60 °F and 14.696 psia.

Formulas used

Ideal gas law

P1V1Z1T1=P2V2Z2T2

Mass flow

m=n·M

Assumptions and limits

  • Ideal gas at normal and standard conditions (Z = 1); your Z is applied at line conditions only.
  • Pressures are absolute in the calculation; gauge inputs are converted with 1.01325 bar.
  • "Standard" conditions vary by industry (15 °C, 20 °C or 60 °F); check the basis on your datasheet.

Worked example

1,000 Nm³/h of compressed air at 6 bar(g) and 30 °C.

  1. Absolute pressure = 7.013 bar(a).
  2. Actual flow = 1,000 × (1.01325 ÷ 7.013) × (303.15 ÷ 273.15) ≈ 160 m³/h.
  3. Mass flow = 1,000 Nm³/h × 1.292 kg/Nm³ ≈ 1,292 kg/h.

Frequently asked questions

What is the difference between Nm³/h and Sm³/h?

Both are volumes corrected to reference conditions. Nm³ is usually 0 °C and 1.01325 bar; Sm³ is often 15 °C (sometimes 20 °C) and 1.01325 bar, so 1 Nm³ ≈ 1.055 Sm³ at 15 °C.

How do I convert Nm³/h to actual m³/h?

Multiply by (1.01325 ÷ absolute line pressure in bar) × (line temperature in K ÷ 273.15).

How do I convert Nm³/h of air to kg/h?

Multiply by the normal density of air, 1.293 kg/Nm³.

Need it designed and built?

SEMCO designs, fabricates and commissions evaporators, ZLD plants, heat exchangers, reactors and vacuum systems in its own factories in Pune and Solapur.

Results are engineering estimates for early sizing and budgeting. Final designs depend on your liquid, site and codes, and are confirmed in SEMCO's proposal. Method reviewed by Jogender Dhayal, Director, SEMCO.