Vessels & fabrication · Free tool
Tank and vessel volume calculator
Calculate the total volume and the liquid volume at any level for vertical or horizontal tanks with flat, dished, hemispherical or conical ends, with a ready strapping table.
1. Shape
Orientation
2. Dimensions
3. Liquid level
Liquid volume
27.08m³
27,080 litres, 67.5% full
Total volume
40.121m³
40,121 litres
Liquid mass
27.08t
| Overall inside height / diameter | 6.014 m |
|---|---|
| Straight shell volume | 35.343 m³ |
Level vs volume (strapping table)
| Level | m³ | Litres | % full |
|---|---|---|---|
| 0 m (0%) | 0 | 0 | 0 |
| 0.601 m (10%) | 3.056 | 3,056 | 7.6 |
| 1.203 m (20%) | 7.308 | 7,308 | 18.2 |
| 1.804 m (30%) | 11.559 | 11,559 | 28.8 |
| 2.406 m (40%) | 15.81 | 15,810 | 39.4 |
| 3.007 m (50%) | 20.061 | 20,061 | 50 |
| 3.608 m (60%) | 24.312 | 24,312 | 60.6 |
| 4.21 m (70%) | 28.563 | 28,563 | 71.2 |
| 4.811 m (80%) | 32.814 | 32,814 | 81.8 |
| 5.413 m (90%) | 37.065 | 37,065 | 92.4 |
| 6.014 m (100%) | 40.121 | 40,121 | 100 |
Want these numbers checked?
Send them to a SEMCO process engineer for a free review, sizing and budget price.
How this calculator works
The calculator adds the straight shell to the volume in each head. Dished heads are treated as part-ellipsoids: 2:1 ellipsoidal heads have a depth of a quarter of the diameter, hemispherical heads half, and torispherical (ASME flanged and dished) heads about 0.169 D.
For a horizontal tank the liquid cross-section is a circular segment, and the two heads together form an ellipsoid filled to the same level. For a vertical tank the bottom head fills first, then the shell, then the top head.
Formulas used
Horizontal shell, filled to height h
Both dished heads, horizontal (depth b)
Full head volumes
Assumptions and limits
- Inside dimensions; the straight length is tangent line to tangent line.
- Torispherical heads use an equivalent ellipsoid of the same depth, within a few percent of exact ASME F&D volumes.
- Nozzles, internals and coils are not deducted.
Worked example
Vertical tank, 3 m ID, 5 m straight shell, torispherical heads, filled to 4 m from the bottom.
- Bottom head depth ≈ 0.507 m holding about 2.4 m³.
- Shell volume = π × 1.5² × 5 ≈ 35.3 m³; total about 40.1 m³.
- At 4 m level the liquid volume is about 27.1 m³ (67.5% full).
Frequently asked questions
How do I calculate the volume of a horizontal tank that is partly full?
Multiply the area of the circular segment below the liquid level by the shell length, then add the liquid in the two heads. The calculator does both and builds a level-to-volume table.
What is the volume of a 2:1 ellipsoidal head?
π × D³ ÷ 24, about 0.131 D³, where D is the inside diameter.
What is a strapping table?
A table of liquid volume against level, used to read tank contents from a level gauge.
Need it designed and built?
SEMCO designs, fabricates and commissions evaporators, ZLD plants, heat exchangers, reactors and vacuum systems in its own factories in Pune and Solapur.
Related tools
Pressure vessel thickness (ASME VIII-1)
Shell and head thickness under internal pressure, corrosion allowance, plate selection and MAWP.
Steel weight calculator
Weight of plates, pipes, shells, bars and rings in CS, SS, duplex, titanium and more.
Pump head, power and NPSH
Total head, shaft power, motor size and NPSH available for a centrifugal pump.
Results are engineering estimates for early sizing and budgeting. Final designs depend on your liquid, site and codes, and are confirmed in SEMCO's proposal. Method reviewed by Jogender Dhayal, Director, SEMCO.